One press · Width and height · No ladder
Lift.Seat.Press.
Every skylight, measured before lunch. Work through one Velux opening or forty — each reading logged as a pair in inches, exported order-ready the same afternoon.
Watch it workHow it works
1
Lift
Raise the unit into the opening on its 15 ft extension pole — feet on the floor, no ladder.
2
Seat
The swept wings register the unit square in the bottom-left corner of the reveal.
3
Press
One press fires the lasers across and up: width and height in inches, logged as a pair.
The ladder way / the SM-1 way
40min
Carry the ladder in, set it up, climb, hold the tape, read it upside down, climb down, write it on a scrap of paper. Twice, to be sure.
20sec
Lift, seat, press. The pair is in SkyHub before the pole comes down — nothing retyped, nothing measured twice.
Every reading lands in SkyHub
Measurements sync straight to the SkyHub app by axcciS. Tag each skylight by room, review the pairs on site, and export order-ready Velux sizes — the numbers travel from roof to order without being retyped once.
“Seen from below it is two swept wings and a nose — a stealth bomber parked in your skylight. The name chose itself.”
— Why it’s called StealthMeasure
What ships
Ships complete, ready to work
The questions installers ask
Straight answers
No. The unit rides up on a 15 ft extension pole and you stay on the floor. That is the whole point of the tool — one man, no ladder, no second trip.
The swept wings seat the unit in the bottom-left corner of the reveal, so it registers the same way in every opening. Width goes across, height goes up, and the pair is never transposed.
Width and height in inches, captured as a pair, logged by room in SkyHub and exported as order-ready Velux sizes the same afternoon.
One or forty. Each reading takes a single press, so a full house is a matter of minutes rather than an afternoon.
The StealthMeasure measurement device, its measuring components, and the 15 ft extension pole. $499 per unit, complete. SkyHub is axcciS software — see axccis.com.